Hydro Jetting Experts
What is Hydro Jetting
Hydro jetting is a technique to clean the clogged pipes, drains, sewer lines, and etc. It is useful in clearing the blockage that might be disrupting the water supply. Many a time, this clogging might not lead to blocking and may result in contamination of water which can be dangerous to your health. If this happens to be the case, then it’s the right time for you to call your plumber and get it cleaned.
Hydro jetting machines have a large tanker of water and connections that blast water. A blast of water of very high velocity that exerts a lot of pressure is used to scour the inner surface of the pipes. This high-velocity water is capable of removing any build-up, grease, sand, silt, and even the long struck debris. In hydro jetting, the plumber usually inspects the place with the help of advanced video cameras or related equipment
Such inspection helps in identifying the problem at the grass-root level and then getting the correct solution. Later, a nozzle (which is mostly self-propelled) is inserted into the pipe or drain. After the insertion process, as soon as the nozzle encounters a clog it blasts water. This high-pressure jet starts to remove or dissolve debris at the required positions and does the cleaning work. Moreover, a lot of novice plumbers miss this step but it is advisable to not miss it
A video camera inspection must be carried out, after the cleaning process. This will help in evaluating the condition of the pipe after hydro jetting. The hydro jetting technique is preferred by plumbers over other classic techniques. This is because of its efficiency and the lesser amount of time it takes. Unlike snaking that only breaks the clogs, hydro jetting is capable of removing the scales as well.
When is Hydro Jetting Used
When you encounter a major clogging in your drain, then either you can do some clean by yourself or get a professional to do it for you. However, if you do it, it will be manual and not a permanent solution to the problem. You will surely leave out the grease on the wall and it will soon start working as the adhesive for the new junk. On the other hand, hydro jetting will delay or curb down the entire process to unimaginable extents. So, it is advisable to get the work done by a professional plumber only because the plumber would know a lot of things that you don’t.
A professional snaking of the kitchen line will typically be the first step in unclogging the line. If the snake encounters a hard blockage or grease and sludge is pulled back from the line, drain experts will usually recommend a kitchen hydro-jetting service. It will remove the blockages and clean the line which can also remove any unsightly odors caused by the buildup in the line.
What is Hydro-Jetting?
Using high-pressure water streams and specialty nozzles, hydro-jetting cleans, descales, and removes the toughest kitchen and sewer line clogs
Hydro-jetting uses between 1,500 and 4,000 PSI to scour the insides of the pipelines removing years of hard scale, cutting through roots, and dissolving grease and sludge backing up the pipelines.
The specialty nozzles attached to jetting hoses are designed for specific drain blockages and pipe diameters. They strategically direct the flow of water to rotate once inside the line. They are important to the hydro-jetting process and require advanced training and skill to properly clean drain lines.
Drains become clogged due to heavy buildup, abuse of the line, roots, and clogs over time. In kitchen lines, the most common clogs result from grease, fats, and oils accumulating on the inside of the pipe. They slowly close off the diameter of the line causing backups.
Things Your Should Know About Hydro Jetting
There are a bunch of methods plumbers use to get rid of clogged drains. A severely blocked sewer line, for instance, will require a more forceful approach. One of these approaches includes hydro jetting. If you’re not familiar with the term, you’re in luck. That means you haven’t had any severe issues with your sewer line before
If you ever wondered how a plumbing contractor is even able to get rid of a clog in the middle of the sewer line without tearing it apart, hydro jetting is one of those solutions. Basically, the name of the solution speaks for itself. Hydro jetting uses highly compressed water to blast away at the clogs and clean the insides of the pipes at the same time. That’s basically the gist of it.
What is hydro jetting?
When drain snakes aren’t able to breach through the clogs, plumbers have another solution up their sleeves and that’s hydro jetting. It’s basically pressurized water used to get rid of any stubborn clogs. With the use of a camera, plumbers are able to know where the blockage is. This gives the plumbers a clear view of the problem and allows them to position the hydro jet properly.
How does the process work?
As earlier indicated, hydro jetting uses highly compressed water to blast away at the blockage. This process involves only water. No additives or chemicals are used in the process. This makes it safe for the pipes and the environment. The good thing about this method is that it cleans out the inner lining of the pipes. This means there won’t be any residue that’s left lying on the inner surface of the pipes that would probably be a starter for another blockage. It’s like a more powerful version of a household power washer.
When is the right time to have hydro jetting?
Basically, this type of service is applicable for instances where regular snaking is not working. There are some instances, most likely worst-case scenarios, which will not be solved by snaking alone. Hydro jetting is most commonly used for unblocking mineral deposits and other build ups in the pipelines. It is also recommended before pipe relining as dirty sewer pipes won’t hold the new lining at all.
ASK YOUR PLUMBER ABOUT HYDRO-JETTING TO KEEP YOUR PIPES CLEAN
Hydro-jetting, also known as hydro-scrubbing or hydro-cleaning, is not your run-of-the-mill pipe-cleaning technique. By deploying intensely pressurized water, hydro-jetting completely eradicates rubbish, debris, and other obstructions from sewer pipes and lines. It’s much more effective than mechanical rodding and drain snakes for removing nasty roots, grease, rocks, and mineral deposits.
How Does Hydro-Jetting Work?
Hydro-jetting equipment consists of:
A water tank
A specialized, high-pressure hose
A machine that pressurizes water
Flowing at a tempo of 18 to 20 gallons per minute, the water reaches up to 5,000 psi (pounds per square inch) and is blasted into sewer pipes through what is called a ”cleanout.” Every system is installed with a cleanout. It enables plumbers to reach into the lines for cleaning purposes. The nozzle of a hydro-jet is inserted at the downstream end of the system, and the water blasts upward, clearing out waste. After the job is completed, the waste and water all come back down—thanks to gravity—and leave the system as normal.
Hydro-jetting should always be completed by an expert. Doing this job without the required experience could result in further damage to your pipes or plumbing equipment. Not all jobs that need this high-pressure blast of water will require the maximum psi. Experienced plumbers know exactly what pressure to use and how many gallons per minute should be sent through your system.
When Does a Plumber Use Hydro-Jetting?
Hydro-jetting can be an extremely helpful tool for a wide range of plumbing issues. But before your plumber decides on this method, they will often do a video camera inspection. Sending a camera down the pipes can help your plumber understand exactly what the issue is and where it lies in your plumbing.
Routine plumbing maintenance is extremely important when your plumbing system is at stake. If your pipes were installed by a professional, they are meant to last for many years, if properly taken care of. But what if you have purchased an older house where a previous owner neglected his pipes completely?
Most likely the drain and sewer systems accumulated a significant amount of waste and deposit during the time of former owner’s use, so they cannot operate to the highest efficiency. Drain clogs are also not fun, no matter whether they are big or small. Things like tree roots and amassed slush from years of all the junk going down your drains that were not supposed to be flushed are some of the reasons why these kinds of clogs formed in the first place
If nothing works and you don’t know what to do, a plumbing treatment known as hydro jetting can save you the trouble. Also in order to clean up your drain or sewer system, hydro jetting services will come in handy.
So what is hydro jetting?
Hydro jetting is a plumbing method that uses high-powered gusts of water to blast through everything that stands in its way. This high-pressure water treatment can get to 4,000 psi but it won’t do any harm to your pipes and clear some of the most stubborn clogs. If the opening of the pipe is really narrow because of all the junk inside the pipe, hydro jetting technique can literally scrape out the insides of your pipe to return the opening to its original condition.
Some homeowners think that it is quite possible to clean the drains with any high pressure hose, however, the amount of pressure and skill required are not the same. If you don’t want to get disappointed, do not place your power washer inside a seriously clogged drain – the results won’t be the ones you expected. The water gusts created by a hydro jetting machine are powerful enough to damage your plumbing and even cause injury, unless they are performed by a qualified technician. Hydro jetting is not the plumbing technique that you might dare attempt on your own.