Domestic Epoxy Flooring

Can an Epoxy Floor Finish Be Recoated?

Epoxy floor paint creates a durable, impermeable surface that’s harder than the concrete or wood substrate, but it doesn’t last forever. You can recoat an epoxy finish that has lost its sheen or otherwise been damaged, but you have to properly prepare it or the new epoxy won’t adhere. This preparation must include careful cleaning with a grease-cutting detergent to remove the thin, oily layer that has probably built up, but may be invisible. That isn’t all, though. You also need to etch the surface to make it rough enough to bond with the new finish.

  • Repair chips and holes in the floor. If you use fresh mortar, allow the repairs to cure for at least 60 days prior to recoating with epoxy. You can also make the repairs with epoxy patching compound, which cures in a matter of days rather than months.
  • Mix a solution of grease-cutting detergent and warm water to clean the floor. All-purpose household cleaner usually works for floors inside the house, but if you’re recoating a concrete garage floor, choose an industrial-grade product that can remove heavy-duty grease and oil deposits. Mop the floor with the detergent solution, and use a scrub brush to remove grease deposits.
  • Rent a floor buffer, screening attachment and 80-grit sanding screen. Sand the floor with the buffer to etch the finish. Use a pad sander with 80-grit sandpaper to etch in corners and other places that the buffer can’t reach.
  • Vacuum the floor and wipe it down with a damp rag to remove all traces of old finish leftover from sanding.
  • Mix the epoxy paint and hardener according to the instructions that come with the paint. Prepare only enough to cover the floor, because any leftover paint will be unusable.
  • Paint the edges of the floor with a paintbrush, and then use a paint roller and 3/8-inch nap roller skin to paint the main area. If you’re adding color flakes, roll the floor in sections and spread the flakes on each section as you finish it.
  • Let the paint cure for 12 to 24 hours, depending on the product you’re using. Mix enough clear epoxy finish with hardener to cover the floor and spread it in the same way that you spread the color coat.
  • Allow the clear coat to cure for the recommended time, which is usually from 12 to 24 hours. If you’re coating the garage floor, wait 72 hours before driving your car on it.

Chips and Cracking: How to Repair Your Epoxy Floors

Your epoxy floor is one of your favorite surfaces in your home. It is strong, is easy to clean and maintain, and everyone always comments on how great it looks. This is why it’s essential for you to know how to handle any chipping or cracking that may occur. Take these steps for epoxy floor repair to ensure that your floor keeps looking as good as the day you first had it installed.

If the chipping or cracking is minor, you can get away with simply applying a compound to the floor to fill in the gaps. Using a fresh mortar, trowel in the material until it fills the crack or chip and overflows out of the top. Then use the trowel to smooth the surface and remove any excess mortar. This will patch your floor and keep any damage from getting worse over time. Let these repairs cure for no less than 60 days before applying a new coat of epoxy.

In many cases, your cracked epoxy floors may be better off being resurfaced instead of just patched. This is ideal if the damage is extensive and seen across much of the entire surface. To prepare the area for epoxy floor repair, thoroughly sweep the area and use a grease-cutting detergent to remove any oil that may be on the surface. After this, you can use patch any chips and holes in the floor with a faster acting epoxy patching compound. This cures in a few days, so you can apply a new coat of epoxy sooner.

Once your Epoxy patch has cured properly according to instructions, clean the floor again to remove any dirt and oil, then buff the floor with an 80-grit sanding screen. Vacuum and wipe the floor to remove any dust and apply the epoxy paint. This must cure for 12 to 24 hours, then you can apply a clear epoxy finish.

So, Why Do DIY Garage Floor Epoxy Paint Kits Get A Bad Rap?

If you’ve ever walked down the paint aisle at your local home improvement store you’ve probably seen the DIY Garage Floor Epoxy Painting Kits for $50-100. If you ask anyone that’s used these products you’re sure to get alot of different answers. That’s because many people don’t have a good long term experience with these low cost / cheap products. They often complain of the epoxy paint bubbling or peeling up fairly quickly. There are even a couple of stellar reviews that make you think; just maybe these products don’t deserve the bad rap they get.

These kits are of course cheap, and appeal to the DIY weekend warriors that are looking for a relatively quick and easy project. I’m a car guy myself and I love tackling small car and home improvement projects on the weekend. The allure of these kits is perhaps the extremely low cost and the extremely high expectations most people have due to the pictures and advertising of these products. Where these products typically fall short is comparing them to high solids, high performance coatings, and the lack of training and communication needed to install a garage floor coating correctly. And of course, the big, big difference, that spells disaster in many of these cases is the floor preparation method used.

Why Choose Garage Epoxy Floor Coating?

Outdoor or indoor garage epoxy floor coating is requested upon a certain need. The advantages of the garage epoxy flooring are considerably higher than expected. For this reason, garage epoxy flooring has become the preferred and highly demanded place. The epoxy floor system we use in the garage provides visual and dust-free use for a long time.epoxy is an industrial chemical type, it is not easily scratched and aging, so it can be used with peace of mind for many years.In addition, it increases the satisfaction level of the users with the advantage of not being easy to clean, water repellent and slippery floor. In garage floor sealing ramps, epoxy floor surface that prevents slipping due to rubber grip makes the garage reliable. The physical and chemical resistance of the parking spaces made with epoxy application polyurethane resins is at the highest level.As we mentioned at the beginning of our garage epoxy flooring product, this flooring is divided into two. these are outdoor and indoor epoxy floor covering.

The open garage is made of self-leveling epoxy garage floor due to UV resistance. The polyurethane resin garage floor paint used in open car parks will not fade due to their UV resistance. It is resistant to all kinds of natural conditions.In addition, polyurethane and epoxy resins prevent icing at freezing temperatures, especially in open areas.Since flat glassy polyurethane based resins are more flexible than epoxy resins, they tolerate dynamic static movements on vibrating floors, so polyurethane coatings should be preferred for moving floors.

for indoor parking lots. The garage floor coating epoxy or polyurethane based resins expire due to the main problem of the underground parking garage dust complaints.The main complaints in the underground garage are dusting and cracking on the garage floor. epoxy floor applications will completely save you from these complaints. Another advantage of epoxy floor applications is that they are more modern in appearance.and remember that this look will remain intact for many years

Types of epoxy flooring

There are many different types of epoxy floor coatings, and each has a different application and purpose. It is important to know what is right for your needs before you decide which kind of flooring to install in your business. You can always contact our RI epoxy floor installers to learn more about which option is right for you, but this handy guide should help you with your decision.

Solid color epoxy

Standard and economical coatings for floors. Withstands heavy traffic, continual washing, chemical attack. Good for warehouse, manufacturing, institutional areas where a very durable and low maintenance floor is needed. This is a standard economical coating for most concrete floors. It can withstand heavy traffic, continual washing, and chemical spills. They are perfect for spaces such as warehouses, factories, and institutional spaces where a very durable and low-maintenance floor is needed.

Decorative epoxy

Beautiful multicolored floors with multicolored sand or flakes. Used in garages, locker rooms, institutional showers and rest room areas etc. These floors are easier to maintain and keep clean. This is a beautiful floor that is made with multicolored sand or flakes to give your floor a more colorful appearance. It is often used in garages, locker rooms, institutional showers and restrooms, but its aesthetic appeal also lends itself well to living rooms, large basements, or commercial office floors. As with solid color epoxy floors, decorative epoxy is easy to maintain and keep clean

Chemical resistant epoxy

For commercial kitchens, food or chemical process areas, animal care etc. As its name implies, this type of epoxy flooring is intended to resist chemical spills. It is often used in commercial kitchens, food and chemical processing areas, spaces used for animal care, and any other space that might be prone to chemical spills and stains.

Clean room floor

Meets a high standard of cleanliness. Smooth, dust free, and easily cleanable. These floors are used in spaces that need to adhere to a higher level of cleanliness. They are smooth, dust-resistant, and very easy to clean.